Installation Of Ground Tripod

Installation Of Ground Tripod
Details:
Material: Aluminum alloy Surface treatment Andoized Maximum snow load :1.4 kn/m ² Maximum wind speed :216km/h = 60 m/s Applicable modules: Framed or frameless Key words: Solar ground system Warranty: 10-year warranty and 25-year service life
Send Inquiry
Description
Send Inquiry
 

 

 

product-1083-644

 

 

📌 Features and applicability of ground tripods
The ground tripod photovoltaic support is widely used mainly because it has the following advantages:

Good stability: The triangular structure naturally has excellent mechanical stability and can effectively resist external loads such as wind and snow pressure, protecting photovoltaic modules.

Strong flexibility: The installation Angle can usually be adjusted as needed to enable the photovoltaic panels to better face the sun and improve the power generation efficiency.

Adapt to various types of ground: Whether it is a cement ground, soil or other flat ground, the tripod can adapt well.

The installation is relatively simple: The modular design enables on-site installation without the need for complex welding; it can be done through bolt connection, saving time and labor costs.

This type of bracket system is often used in scenarios such as family courtyards and small distributed power stations, and some are also designed for mobile platforms like recreational vehicles and yachts.

📝 introduction to installation steps
Although the specific installation process may vary by brand and design, it generally includes the following basic steps:

Site selection and evaluation: Choose an open space with good lighting and no obstructions. Assess the ground condition to ensure it is flat and solid. If the soil is soft, it may be necessary to carry out compaction treatment or even pour a concrete foundation.

Installation base: According to the ground conditions and the design requirements of the bracket, fix the base of the tripod. On a cement floor, expansion bolts may be used for fixation. On a muddy ground, prefabricated cement piers or spiral ground piles may be required as the foundation.

Assemble the tripod: Connect all the components of the tripod (columns, diagonal braces, etc.) with bolts as per the instructions. Please note that all screws should not be completely tightened at first to facilitate the subsequent unified adjustment of the Angle and overall level.

Install the guide rails: Install the guide rails used to fix the photovoltaic panels onto the support surface of the tripod, and adjust the distance between the guide rails according to the size of the photovoltaic panels.

Fixed photovoltaic modules: Place the photovoltaic panels on the rail and use a dedicated module press block to firmly fix the photovoltaic panels on the rail.

Leveling and tightening: Use a level to check the levelness and inclination Angle of the entire support and photovoltaic panel. After adjusting to the optimal Angle, tighten all bolts thoroughly.

Electrical connection and grounding: Connect the cables of each group of photovoltaic panels and ensure reliable grounding to guarantee system safety.

⚠️ installation notes
Wind and snow resistance: Ensure that the design and fixation method of the support can withstand the maximum wind force and snow weight in the local area. For instance, some tripods are designed with a maximum wind resistance capacity of up to 60m/s and a maximum heavy snow load of 1.4kN/m².

Materials and Anti-corrosion: For long-term outdoor use of the support, the corrosion resistance of the materials is of vital importance. Common ones include hot-dip galvanized steel (with a weather resistance of about 25 years) or anodized aluminum alloys (such as 6063-T5, with a lifespan of over 25 years). Fasteners are also recommended to be made of stainless steel (such as SUS304).

A solid foundation: If the foundation is not solid, the earth will shake and mountains will crumble. It is essential to select and build a suitable foundation based on geological conditions and the load requirements of the support. This is the primary guarantee of safety.

Adhere to standards and warranty: During installation, try to follow the product instructions and professional guidance as much as possible. Many genuine products offer a quality guarantee of up to 10 years.

Safety first: Pay attention to safety when working at heights. When installing and making electrical connections, be sure to disconnect the power supply to prevent electric shock.

Hot Tags: installation of ground tripod, China installation of ground tripod manufacturers, suppliers, factory, Solar Mounting Ground Screw, residential ground solar panels, helical pile fundation, solar rack ground mount, flat roof solar mounting, free standing solar array

Send Inquiry