
🌟 features of the ground tripod system
The ground photovoltaic tripod system mainly has the following advantages:
Stable support: The triangular structure design and sturdy materials (such as aluminum alloy AL6063-T5) can ensure the stability of photovoltaic modules when facing severe weather conditions such as strong winds (wind resistance capacity up to 60m/s) and heavy snow (snow load capacity such as 1.4KN/m²).
Flexible and adjustable: Many systems support Angle adjustment, allowing the tilt Angle of photovoltaic modules to be adjusted according to seasonal changes or geographical locations to optimize light absorption efficiency and increase power generation.
Strong weather resistance: The main materials (such as aluminum alloy) usually have corrosion resistance and can adapt to various harsh environmental conditions, ensuring the reliability of long-term use.
Easy installation: Many systems adopt highly pre-assembled designs and modular designs, eliminating the need for on-site cutting and welding. This can effectively enhance installation efficiency and save time and labor costs

The wind resistance capacity can reach 60m/s, or the designed maximum wind speed is 42m/s. It must be selected based on local meteorological conditions and ensure a firm installation
Snow load: 1.4KN/m² (approximately 140kg/m²). Areas with thick snow cover should be given priority consideration
Material: Aluminum alloy (such as AL6005-T5, AL6063-T5: light in weight, good in strength, and corrosion-resistant)
For stainless steel (with good corrosion resistance), attention should be paid to the surface treatment of the material (such as anodizing) and thickness
The common adjustment angles are 10°-15°, 15°-20°, 20°-25°, 30°-40°, etc. Some can be customized to select the range suitable for the local optimal inclination Angle (generally close to the local latitude)
Compatible components: Framed or frameless photovoltaic modules ensure that the bracket model matches the selected module
Fastener material: Stainless steel (such as SUS304)
1. Bracket system installation:
Foundation construction: Select an appropriate fixation method based on the design and soil conditions.
Concrete foundation: Use C25 concrete and pre-embed anchor bolts (such as M12×200mm).
Ground anchor fixation: Suitable for soil surfaces.
Ballast fixation (counterweight block) : Suitable for places where the ground cannot be damaged.
2. Installation bracket
Ensure that the verticality deviation of the support is ≤1mm/m and the Angle deviation is no more than ±1 degree.
Use galvanized flat iron (such as 40*4mm) for grounding.
3. Installation of photovoltaic modules
Component fixation
The spacing of the pressure blocks is usually no more than 700mm.
Component clearance: At least 20mm laterally and at least 30mm longitudinally.
It is recommended that the lowest point of the component be at least 300mm above the ground to avoid the influence of ground debris, water accumulation, etc.
4. Electrical connection:
When using dedicated connectors such as MC4, make sure the positive and negative pole markings are clear.
Cable allowance: Reserve 20-30cm at each end
Hot Tags: quick installation kit for triangular solar brackets, China quick installation kit for triangular solar brackets manufacturers, suppliers, factory, Solar Mounting Ground Screw, helical screw pile, helical pile fundation, solar rack ground mount, flat roof solar mounting, free standing solar array
